Cement Plant Wear Resistant Replaceable Weld on Ceramic Slide Pulley Lagging

Product Detail

Cement plant wear resistant replaceable weld on ceramic slide pulley lagging

Ceramic Slide lag are constructed of specially compounded abrasion resistant rubber, superior wear resistant ceramic tiles, integrally molded and vulcanized rubber high pressure to a heavy gauge steel backing plate which is preformed to the pulley diameter.

The ceramic slide lag designed for extreme working conditions, such as conveying wet, adhesive, mud and high wear materials. 




?Specification & Size

Description	Length. Mm / in	Width. Mm / in	Thickness. Mm / in
Ceramic Slide lagging	1830 (72’’)	138 ( 5 7/16”)	12 ~ 20 mm (1/2” to 3 /4” )
No. Of pads for each drum. Calculation Formula: ( 3.14 * drum diameter .mm) / 160 For example: drum diameter: 630mm, then each drum needs 13 PCS of slide lag pads.


?Parameters

For ceramic tiles		For rubber compound
Aluminum Oxide (min) Al2O3	92%	Polymer	NR / SBR
Specific Gravity	> 3.7	Specific Gravity	1.1 ~ 1.3 g/m3
Hardness ( Moh’s )	> 9t	Hardness, Shore A	62 +/-5
Tensile strength (Mpa)	20	Elongation at break, % min	450 %
Water absorption	0%	Tensile strength	17.5 N/mm2


?Work Flow



?Advantages

No belt slip, wet or dry

Offers superior traction

Easy and Fast installed and replaced, reduce downtime

Without removing drum, reduce cost

The slide pads fixed by retainer, safe and steady




?Client Visit



?Exbihition